location:Home > News >


Wolfwhoop Q3 Switchable FPV Video Transmitter

Color:RP SMA Female

FC Uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts.
This VTX is that you can mount it on top of your FC/PDB stack thanks to the 30x30mm mounting pattern like OMNIBUSF4 and OMNIBUSF4 Pro.
MMCX has more mating cycles and is more robust.

5V output for camera
2S-6S input power supported
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable
Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro) 
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera
0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
LED display for indicating CH/Band/Power

Operating Voltage: 7 - 24V
Power supply: 5V camera@under 0.3A max
Output power:
25mw: 120mA @12v
200mw: 200mA @12v
500mw: 280mA @12v
800mw: 330mA @12v
Range: Up to 4km with omnidirectional RHCP antennas
Antenna connector: MMCX
Video Format: NTSC/PAL
Port connector: JST,6pin
Dimensions: 36(W)x36(D)mm, 30.5x30.5mm(hole)
Weight:7.4g(excluding antenna)

Note : 

Before powering the VTX up, it's very important to first installed antenna otherwise the product will have static

The vtx can power up 5V camera @ under 300mA

Wolfwhoop is never good at brand promotion, the only thing we do is manufacturering. 
Wolfwhoop promise that every piece of product you bought from our store is made by Wolfwhoop self-owned factory. 
Keep real, keep factory direct. 
Save money, fly better.